Jhaptaal (झपताल), also written Jhaptal, Jhap Taal or Jhap Tal, is a 10-matra rhythmic cycle of Hindustani music. Its four vibhags have an unequal-looking sequence of 2 + 3 + 2 + 3. To keep time you clap on beats 1, 3 and 8 and wave on beat 6. A widely taught Jhap taal theka is Dhi Na | Dhi Dhi Na | Ti Na | Dhi Dhi Na. [Sources 1–3]
Player notation: DigiTabla also writes this theka Dhin Na | Dhin Dhin Na | Tin Na | Dhin Dhin Na. Our Tabla player uses those equivalent names and the resonant Dhin/Tin strokes. This guide retains the familiar spoken Dhi/Ti form. The original CC0 sample bank still approximates some distinct articulations.
This lesson goes beyond a list of taal names. It shows exactly where every jhaptaal bol belongs, how to move your hands, why the third division feels lighter, and how to return accurately to sam. If you need a comparison of several rhythms first, see our tabla taal list and theka chart.
10 matras · 4 vibhags · 2 + 3 + 2 + 3
Clap 1, 3, 8 · Wave 6 · Signs × 2 0 3
Dhi Na | Dhi Dhi Na | Ti Na | Dhi Dhi Na
What are the bols of Jhaptaal theka?
A bol is a spoken syllable representing a tabla stroke or a combination of strokes. A theka is a recognisable repeated accompaniment pattern. Say the following ten bols in order, holding an even pulse; each bold syllable corresponds to one matra in this basic notation:
Standard Jhaptaal theka
Dhi Na | Dhi Dhi Na | Ti Na | Dhi Dhi Na 1 2 3 4 5 6 7 8 9 10
In Devanagari, a common classroom version is धी ना | धी धी ना | ती ना | धी धी ना. DigiTabla also documents the Dhin/Tin transcription: Dhin Na | Dhin Dhin Na | Tin Na | Dhin Dhin Na (धिं/तिं). The forms are both used in teaching; spelling alone does not establish a different taal. [Source 2]
Jhaptaal notation: all 10 matras in 2 + 3 + 2 + 3
Read the following original numbered teaching diagram from left to right, then return straight to beat 1. Brown headers start clapped divisions; the green header begins the waved khali division. The symbols describe the hand movement at the start of a group, not on every beat.
Read back to sam: after 10 (Na), the very next matra is 1 (Dhi). Four groups; ten equally counted matras. No silent extra beat between cycles.
| Matra | Bol | Sign | Hand gesture |
|---|---|---|---|
| 1 · sam | Dhi (धी) | × | Clap |
| 2 | Na (ना) | — | Continue counting |
| 3 | Dhi (धी) | 2 | Clap |
| 4 | Dhi (धी) | — | Continue counting |
| 5 | Na (ना) | — | Continue counting |
| 6 | Ti (ती) | 0 | Wave · lighter section |
| 7 | Na (ना) | — | Continue counting |
| 8 | Dhi (धी) | 3 | Clap |
| 9 | Dhi (धी) | — | Continue counting |
| 10 | Na (ना) | — | Continue counting |
Remember: × marks the first clapped division and sam, 2 marks the next clap, 0 marks the waved khali section, and 3 marks the third clap. They are division labels, not the numbers of the beats. [Source 1]
Where are tali, khali and sam in Jhaptaal?
Sam is the first beat of each cycle. Here it is a clap. At beat 3 you clap again; at beat 6 you wave; at beat 8 you clap. The remaining beats are silently followed with your count or foot, without additional claps. Speak the sequence out loud: clap … clap … wave … clap … and back to clap.
1 2 | 3 4 5 | 6 7 | 8 9 10
Clap · clap · wave · clap, starting on the first number in each group.
1 2 3 4 5 | 6 7 8 9 10 hides the four vibhag gestures. Two five-matra halves can help memory, but do not replace the taught 2 + 3 + 2 + 3 structure.
Why does Ti (or Tin) replace Dhi (or Dhin) at khali?
In a typical tabla theka, a resonant Dhi/Dhin combines strokes of the high-pitched dayan and lower bayan. Ti/Tin in the basic waved group has a lighter, principally right-hand quality; the usual bass sound is absent. That audible contrast helps singers and listeners locate the 6–7 section while hearing continuous beats. It does not mean you stop playing on khali. [Source 1]
Teachers may pronounce or execute bols with small stylistic differences. Focus first on the cycle's landmarks: Dhi at 1, Dhi at 3, Ti at 6, Dhi at 8. For nuanced stroke technique, listen to the multi-angle demonstrations linked in the source section rather than trying to infer every hand movement from spelling alone.

How to clap Jhaptaal: an original six-minute exercise
Use a slow pulse at first. You can do all six steps without any instrument. Keep an imagined count moving between your claps.
- Minute 1 — Count ten evenly. Say 1–10 aloud and loop back to 1. Avoid inserting an eleventh beat at the turnaround.
- Minute 2 — Learn group lengths. Speak ONE two | ONE two three | ONE two | ONE two three while keeping your underlying ten-matra count.
- Minute 3 — Add gestures only. Clap on 1 and 3, wave on 6, clap on 8. Try three uninterrupted cycles.
- Minute 4 — Add bols. Recite Dhi Na | Dhi Dhi Na | Ti Na | Dhi Dhi Na, giving each bol one equal matra.
- Minute 5 — Feel the light group. Make the wave visible at 6 and slightly soften your voice on Ti Na. Do not slow down or leave silence there.
- Minute 6 — Test your sam. Complete four cycles while speaking softly, then clap clearly on the first Dhi of cycle five. If the clap drifts, return to counting before speeding up.
Hear the Jhaptaal cycle as you practise
Our free Tabla player opens with Jhaptaal selected at 72 BPM. Press Play yourself and follow its numbered beats; the recording is assembled from individual tabla samples, not a concert performance.
For singing practice, choose a comfortable tonic with our find-your-Sa guide or use the Tanpura player as a steady drone. A tanpura sustains pitch; it does not indicate clap or wave positions unless you separately turn on tabla accompaniment.
Common Jhaptaal theka variations and bol spellings
Learning one clear basic theka should come before decorating it. DigiTabla presents variations associated with tabla musician Chhotelal Misra. A simple example repeats the final Na of each three-beat group: Dhi Na | Dhi Dhi Na-Na | Ti Na | Dhi Dhi Na-Na. Those doubled syllables fit inside the same fifth and tenth matras; they do not turn a ten-matra taal into twelve. [Source 3]
Compare a simple variation
Basic: Dhi Na | Dhi Dhi Na | Ti Na | Dhi Dhi Na Variation: Dhi Na | Dhi Dhi Na-Na | Ti Na | Dhi Dhi Na-Na Beats: 1 2 3 4 5 6 7 8 9 10
Professional tabla playing can add other decorations, subdivisions or compositions. These are not competing definitions of Jhaptaal. The telltale structure remains 10 matras, 2 + 3 + 2 + 3 and clap–clap–wave–clap. If a teacher uses different bols, ask where the divisions start before changing your count.
How to recognise Jhaptaal in a recording or khayal lesson
Jhaptaal is used in Hindustani vocal and instrumental contexts, including medium-tempo khayal and tabla solos. The names, tempo and accompaniment may change with repertoire; neither a fast passage nor the number “ten” alone proves that you are hearing Jhaptaal. Listen for the two short groups followed by two three-matra groups in alternation, and for the lighter Ti Na section. [Source 1]
Try this sam-finding listening exercise: start a familiar piece, wait for a phrase ending that feels like the start of a new cycle, and tap a tentative “1”. Follow it with the count 2 | 3 4 5 | 6 7 | 8 9 10. If your “1” consistently meets the accompaniment's landing point on each repetition, you are probably tracking the tala correctly. If not, move your starting point and try again rather than forcing the music into a guessed count.
Our five-taal chart also shows how Jhaptaal differs from Teentaal (16), Dadra (6) and Rupak (7). In particular, Rupak's sam is itself a wave; Jhaptaal begins with a clap.
Four beginner mistakes to fix immediately
- Clapping on 6: that is khali; wave there. The next clap is on 8.
- Grouping all ten as five plus five: the practical hand sequence marks four divisions, not two. Say 2 + 3 + 2 + 3.
- Stopping after beat 10: immediately restart on 1. A missing or extra pause ruins your arrival at sam.
- Counting an ornament as a new matra: the two Na syllables in a variation can be subdivisions of a single beat, not two additional beats.
Frequently asked questions
Expand a question for a short, practical answer. The same answers are represented in the page's structured data.
How many beats (matras) are in Jhaptaal?
Jhaptaal has 10 matras. They are grouped into four vibhags: 2 + 3 + 2 + 3.
What are the bols of Jhaptaal?
A widely taught theka is Dhi Na | Dhi Dhi Na | Ti Na | Dhi Dhi Na. You may also hear or read Dhin Na | Dhin Dhin Na | Tin Na | Dhin Dhin Na.
Where are tali and khali in Jhaptaal?
Clap on matras 1, 3 and 8. Wave on matra 6. Beat 1 is sam, the start of each 10-beat cycle.
What do X, 2, 0 and 3 mean in Jhaptaal notation?
X is sam and the first clap on beat 1; 2 and 3 label the next clapped divisions at beats 3 and 8; 0 marks khali, a wave at beat 6. They are division markers, not beat numbers.
Are Jhaptaal and Teentaal the same?
No. Jhaptaal has ten beats arranged 2 + 3 + 2 + 3. Teentaal has sixteen beats arranged 4 + 4 + 4 + 4. Both have a sam and a khali, but their cycles and hand gestures differ.
Is Jhaptaal the same as two groups of five?
The ten beats can be remembered as two repeating 2 + 3 phrases, but standard Jhaptaal notation and gestures mark four groups: 2 + 3 + 2 + 3. Do not erase the clap at 3 or the wave at 6.
Does khali in Jhaptaal mean the tabla stops?
No. You still count and play matras 6 and 7: Ti Na in the basic theka. Khali is shown by a wave and typically has a lighter, bass-free sound.
Can I practise Jhaptaal without a tabla?
Yes. Count 1 2 | 3 4 5 | 6 7 | 8 9 10, clap on 1, 3 and 8, wave on 6, then speak the bols. A tabla player or metronome is optional for a beginner.
Sources and image credits
This lesson distinguishes a widely taught basic theka from optional variations. The beat diagram, examples and six-minute practice routine are original instructional material, not a copy of a source chart.
- DigiTabla: Jhaptal — Structure, Tali-Khali & Timekeeping. Describes 10 beats, 2 + 3 + 2 + 3, × 2 0 3, vocal/instrumental uses and timekeeping demonstrations.
- DigiTabla: Standard Jhaptal Theka. Primary bol notation in Latin and Devanagari, with spoken and performance videos.
- DigiTabla: Jhaptal Theka Variations. Chhotelal Misra variations and the Dhi/Dhin, Ti/Tin pronunciation conventions.
- David Courtney's compilation: Jhaptala — 10 Matras. 1/3/8 claps, beat 6 khali, and standard ten-bol structure.
- Photographs: Concert at the Musée Guimet by Jean-Pierre Dalbéra (CC BY 2.0); tabla learning session by Pandit Sudarshan (Tablalahara) (CC BY-SA 3.0). Article-card portrait of a tabla artist by 9was6ik (CC BY-SA 4.0). Wikimedia Commons. Responsive layout may crop the originals; attribution and licence links are provided.