Looking for a tabla taal list with theka? The chart below compares five widely taught Hindustani cycles: Teentaal (16 beats), Keherwa (8), Dadra (6), Rupak (7) and Jhaptaal (10). Each has a recurring number of matras (counting units), groups called vibhags, a pattern of claps and waves, and a recognisable theka made from tabla bols.
This is a starter reference, not a complete catalogue of Indian taals. The written thekas are familiar teaching forms. Other lineages and performance styles use different strokes and spellings without changing the cycle’s basic count. For a fuller explanation of the unusual seven-beat example, visit our Rupak taal notation guide.
16 · 8 · 6 · 7 · 10 are the matra counts for Teentaal, Keherwa, Dadra, Rupak and Jhaptaal respectively. A vertical bar (|) marks a group boundary, not a pause in the music.
Tabla taal list: beats, theka, tali and khali chart
Use the table to compare matra count, vibhag structure, hand gestures and a common theka. “Clap” includes the sam gesture when sam is clapped; a “wave” marks a khali section. Read one main bol per beat in the teaching patterns shown here.
| Taal | Matras | Vibhags | Hands at group starts | Common theka (bars mark groups) |
|---|---|---|---|---|
| Teentaalतीनताल | 16 | 4 + 4 + 4 + 4 | Clap 1 · Clap 5 · Wave 9 · Clap 13 | Dha Dhin Dhin Dha | Dha Dhin Dhin Dha | Dha Tin Tin Ta | Ta Dhin Dhin Dha |
| Keherwaकहरवा | 8 | 4 + 4 | Clap 1 · Wave 5 | Dha Ge Na Ti | Na Ka Dhin Na |
| Dadraदादरा | 6 | 3 + 3 | Clap 1 · Wave 4 | Dha Dhin Na | Dha Tin Na |
| Rupakरूपक | 7 | 3 + 2 + 2 | Wave 1 · Clap 4 · Clap 6 | Tin Tin Na | Dhin Na | Dhin Na |
| Jhaptaalझपताल | 10 | 2 + 3 + 2 + 3 | Clap 1 · Clap 3 · Wave 6 · Clap 8 | Dhin Na | Dhin Dhin Na | Tin Na | Dhin Dhin Na |
Important exception: In Rupak, sam and khali both occur on beat 1. It is a wave, not a clap. In the chart, 0 / × marks that shared beginning; some teachers write 0 1 2 rather than 0 2 3 for its groups. These systems highlight the same 3 + 2 + 2 rhythm.
Taal vs theka: what do the words actually mean?
A taal is the rhythmic framework: a repeating cycle of matras grouped into vibhags. One complete journey around the cycle is an avartan. The first matra is sam, where the cycle starts again. A theka is the characteristic tabla-stroke pattern used to make that structure recognisable in accompaniment. A bol is the spoken syllable for a stroke or combination of strokes.
For example, both Dha Dhin Na | Dha Tin Na and a more ornamented accompaniment pattern can belong to a six-matra Dadra cycle. The accompanying pattern changes; the structure of six counted matras, grouped 3 + 3, stays recognisable. That distinction matters when listening to professional performances.
How to read ×, 0, 2 and 3 in taal notation
Numbers written above or alongside a theka typically label clap divisions; they do not mean “second beat” or “third beat”. A khali group is signalled by a wave of the hand, but it still contains beats and sounding bols. In particular, khali does not mean silence.
Notation conventions differ. Some musicians label Rupak’s waved sam as 0; others add × to show the cycle beginning. Follow your teacher’s chosen symbols while keeping the same underlying count. Research examples from CompMusic / Universitat Pompeu Fabra compare these rhythmic structures.
Five common tabla taals: visual beat-by-beat theka diagrams
In each original diagram, a coloured header marks the beginning of a vibhag. Warm brown means clap; green means wave. The numbers under each bol are the matras. Read left to right, then return immediately to beat 1. On narrow screens, swipe across the diagram without changing the musical grouping.
Teentaal 16 matras
4 + 4 + 4 + 4 · तीनताल
Four groups of four. Clap on 1, 5 and 13; wave on 9. Its balanced 16-beat structure makes it a useful introduction to sam and returning to the first beat.
Want all 16 bols, the khali variant and a slow sam-finding exercise? Read the Teentaal theka lesson.
Keherwa 8 matras
4 + 4 · कहरवा
The eight-beat cycle often heard in bhajans, film music and light-classical accompaniment. This is a teaching theka; performers use many other grooves and laggis.
For all eight bols, a 3–3–2 accent example and laggi context, see our Keherwa theka lesson.
Dadra 6 matras
3 + 3 · दादरा
Two groups of three give a six-beat lilt. Clap at 1 and wave at 4. It is common in lighter genres, but not every six-beat song has to use this exact bol pattern.
To see all six bols and practise clap–wave counting, read the Dadra taal theka guide.
Rupak 7 matras
3 + 2 + 2 · रूपक
The exception worth remembering: sam on beat 1 is also khali, so you wave there. Clap on 4 and 6. See the separate Rupak guide for full notation and variations.
Jhaptaal 10 matras
2 + 3 + 2 + 3 · झपताल
Not 5 + 5: count it as 2 + 3 + 2 + 3. Clap on 1, 3 and 8 and wave on 6. Unequal group lengths are the distinctive clue.
For every bol, clap and variation explained in detail, read the Jhaptaal theka lesson.
For the 16-beat Teentaal example, some teachers instead place a lighter Na Tin Tin Na pattern in the third group. Printed versions such as Dha Tin Tin Ta also appear. These are theka variants, not extra matras. Keherwa has even greater variety in everyday accompaniment, and the sounds Ti/Tin and Ka/Ke may be transcribed differently. See DigiTabla's teaching references for examples.
A practical seven-minute routine for counting tabla taals
You do not need a tabla to learn a taal’s structure. Begin with your voice, one hand and a slow, steady pulse. Counting accurately matters more than speeding up. After counting the gestures by hand, practise the same cycles with our interactive Tabla player at a comfortable tempo.
- Minute 1 — Pulse only. Pick Keherwa. Count 1 through 8 evenly and begin again at 1 without stopping.
- Minute 2 — Add the hands. Clap on Keherwa beat 1 and wave on beat 5. Do not interrupt the count during the wave.
- Minute 3 — Speak the theka. Recite “Dha Ge Na Ti | Na Ka Dhin Na,” one main bol per matra, and return to Dha.
- Minute 4 — Change the cycle. Try Dadra (3 + 3). Clap beat 1, wave beat 4, and recite its six bols.
- Minute 5 — Find sam by ear and gesture. Count Teentaal with its 1, 5 and 13 claps, and its beat-9 wave. Aim to land on the next beat 1 precisely.
- Minute 6 — Handle uneven groups. Speak Jhaptaal 2 + 3 + 2 + 3 without turning it into 5 + 5; wave on beat 6.
- Minute 7 — Try the exception. Wave on Rupak’s beat 1 (sam + khali), clap on 4 and 6, and return to the first Tin. For a slower guided exercise use our full Rupak lesson.
Using our online tanpura can give you a continuous Sa reference while you recite and sing. The tanpura is a drone, not a beat tracker: it does not automatically mark sam or play these tabla bols. To choose a comfortable singing tonic, read how to find your Sa.

Which taal should a beginner learn first?
Choose Keherwa (8) to hear a straightforward clap-and-wave cycle, then Dadra (6) to feel two groups of three. Learn Teentaal (16) to practise returning to a clear sam over four equal divisions. Move to Jhaptaal (10) for uneven groups and Rupak (7) for the waved-sam exception. This is a suggested practice progression, not a rule followed by every tabla teacher.
Once you can keep these five cycles accurately, explore others such as Ektaal (12) and Deepchandi (14). They are part of the wider Hindustani tradition but are not expanded in this five-taal starter chart.
Three mistakes that make a taal chart harder to use
- Stopping on khali: a wave takes the place of a clap, not the place of the matra. Keep counting.
- Counting every taal as equal-size groups: Jhaptaal is 2 + 3 + 2 + 3, while Rupak is 3 + 2 + 2.
- Treating one spelling as the only acceptable performance: theka bols vary between teaching traditions. Identify the same matra count, divisions and sam before deciding a variant is “wrong.”
Frequently asked questions
Quick answers for students learning tabla taal names, theka notation and counting. Select a question to expand it.
How many taals are there in tabla?
There is no single short, definitive list. This guide compares five commonly taught Hindustani taals: Teentaal, Keherwa, Dadra, Rupak and Jhaptaal. Other important taals include Ektaal and Deepchandi.
What is the difference between a taal and a theka?
Taal is the underlying repeating beat-cycle and its claps, waves and divisions. Theka is a recognisable pattern of spoken or played tabla bols used to express that cycle. A taal can be played with different theka variations.
Which tabla taal has 16 beats?
Teentaal has 16 matras divided 4 + 4 + 4 + 4. Its claps fall on beats 1, 5 and 13; khali is marked by a wave on beat 9.
Which taal has 8 beats?
Keherwa (also spelled Kaharwa or Keharwa) has eight matras grouped 4 + 4, with a clap on beat 1 and a wave on beat 5.
What does khali mean: do you stop playing?
No. Khali is shown with a wave and usually has a lighter quality in the theka. The matras continue and the tabla does not automatically go silent.
Why does Rupak start with a wave?
In the commonly taught seven-beat Rupak pattern, the first matra is both sam (cycle beginning) and khali. Wave at beat 1; clap at beats 4 and 6.
Can a single taal have several thekas?
Yes. The basic counting structure remains while bol spellings, ornamentation, articulation and accompaniment patterns can vary by gharana, teacher and musical context.
Sources and photograph credits
This comparison uses sources on taal structure and published teaching thekas, with editorial examples written for beginners. It does not claim that one pattern exhausts a living performance tradition.
- CompMusic, Universitat Pompeu Fabra: Tāl in Hindustani Music — Examples, covering avartan, matra, sam, vibhag, tali and khali.
- DigiTabla: Tals and Thekas with example structures and standard teaching patterns for Tintal, Rupak, Jhaptal, Kaharawa and Dadra.
- DigiTabla: Standard Jhaptal Theka and Kaharawa Theka, including the note that performance patterns differ.
- DigiTabla: Dadra Theka and Tintal Theka Variations.
- Photographs: Concert performance by Karanderao (CC BY-SA 4.0); tabla instrument pair by Adbh266 (CC BY-SA 4.0). Wikimedia Commons originals are linked; photographs have been resized and may be cropped to fit the article layout.