Dadra taal (दादरा ताल) is a six-matra cycle used widely for Hindustani light-classical, devotional and popular music. Its six beats divide into two vibhags of 3 + 3. The first half begins on sam (beat 1), marked with a clap; the second half begins on khali (beat 4), marked with a wave. A widely taught Dadra taal theka is Dha Dhin Na | Dha Tin Na. [Sources 1–3]

The two equal halves make Dadra easy to remember, but to sing or play it steadily you must feel where the next 1 arrives. This lesson shows the bols in English and Hindi, the hand gestures, a beat-by-beat diagram and a practical routine you can do without owning tabla drums. For the five most common teaching cycles side by side, use our tabla taal list and theka chart.

THE SHORT ANSWER

6 matras · 3 + 3 · two vibhags
× Clap on 1 (sam) · 0 Wave on 4 (khali)
Dha Dhin Na | Dha Tin Na
धा धिं ना | धा तिं ना

What are the bols of Dadra taal theka?

A bol names a tabla stroke or combination of strokes. A theka is the recurring basic bol pattern by which tabla expresses the taal. In this familiar Dadra example, speak one main bol per matra. There is no silent beat at the vertical bar: it is the division between the two groups of three.

Dha  Dhin  Na  |  Dha  Tin  Na
 1     2    3      4    5   6
 ×                  0

Another common spoken form is Dha Dhi Na | Dha Ti Na (धा धी ना | धा ती ना). The differences in Dhin/Dhi and Tin/Ti often reflect pronunciation or teaching convention, not a new rhythmic cycle. DigiTabla prints both styles and records demonstrations by stroke angle. [Source 2]

Dadra taal notation: all six matras in 3 + 3

The following original chart shows the exact order of the bols. The brown heading marks the clapped first vibhag, and the green heading marks the waved second vibhag. Say the numbers under each group aloud: 1–2–3 | 4–5–6, then return immediately to beat 1.

× = sam & clap0 = khali & wave| = group boundary
×
First vibhagClap on 1 · Beats 1–3
1Dhaधा2Dhinधिं3Naना
0
Second vibhagWave on 4 · Beats 4–6
4Dhaधा5Tinतिं6Naना

Each numbered cell is one matra. The × and 0 symbols describe the start of a group; they do not add extra beats.

BeatBol (Hindi)SignHand movement
1Dha धा×Clap · sam
2Dhin धिं—Count
3Na ना—Count
4Dha धा0Wave · khali
5Tin तिं—Count
6Na ना—Count

Where do you clap and wave in Dadra?

Keep a steady count with no gaps: 1 2 3 | 4 5 6. Clap when you say 1 (Dha), then continue on 2 and 3. Wave on 4 (Dha), then continue on 5 and 6. The moment beat 6 ends, the new sam is beat 1 of the next cycle.

×Clap on 1Sam · start of cycle
0Wave on 4Khali · lighter section

Notice that khali is not a rest. Both the wave and the spoken Dha happen on beat 4. Even if you do the whole exercise with your hands in the air, you should still hear the six-beat flow internally. [Source 1]

How does Dhin change to Tin at khali?

Compare the second beat of each half: Dhin on matra 2 versus Tin on matra 5. In common tabla stroke vocabulary, Dhin has a resonant bayan component alongside the dayan, while Tin can be performed as a right-hand stroke. That makes the second group feel lighter, especially when the listener knows the pattern. [Source 2]

Important nuance: do not learn the false rule that “the bass drum cannot sound anywhere during khali.” A familiar Dadra theka begins its waved section with Dha on beat 4, which can still use both drums. The wave marks the division; the contrast of Dhin/Tin helps colour it.

A real, detailed photograph of a traditional tabla pair photographed by Rounik Ghosh
A traditional tabla pair has two drums: the smaller, higher-pitched wooden dayan and larger bass bayan. Photo: Rounik Ghosh · CC BY-SA 4.0, Wikimedia Commons (responsive crop).

Six-minute Dadra taal practice for beginners

Start with a slow pulse, around 70–80 matras per minute. This is a suggested learning speed, not a traditional requirement. You can do every step without a tabla and add recorded strokes later.

  1. Minute 1 — Count without stopping. Say “1, 2, 3, 4, 5, 6” three times, returning to “1” immediately.
  2. Minute 2 — Feel two halves. Say ONE two three | FOUR five six. Keep all six beats evenly spaced even though the two group starts feel different.
  3. Minute 3 — Add hand gestures. Clap on 1 and wave on 4. Keep your hand free of extra claps on 2, 3, 5 and 6.
  4. Minute 4 — Speak the basic theka. Replace the numbers with Dha Dhin Na | Dha Tin Na and repeat four complete cycles. Do not pause at the bar.
  5. Minute 5 — Alternate number and bol cycles. Count 1–6 for one cycle, speak theka for the next, then repeat. The clap on sam should land in the same place.
  6. Minute 6 — Find sam again. Speak theka quietly for three cycles and make a clear clap only on the next beat 1. If you drift, reduce tempo and restart.

Watch Dadra Taal on a real tabla: six-beat video lesson

This beginner demonstration by Swar Sadhna Meerut explains the six matras, the 3 + 3 grouping, a clap on 1 and a wave on 4. The instructor recites Dha Dhi Na | Dha Tu Na, a familiar teaching variation of the Dha Dhin Na | Dha Tin Na form in our chart.

Learn it, then count along

Watch the instructor demonstrate the bols, then pause and try four cycles: clap 1–2–3 | wave 4–5–6. The video loads only when you press Play, so it does not slow down the page on arrival. The demonstration is in Hindi.

Watch the original lesson on YouTube →

Listen to the actual six-beat cycle

Open our free recorded-stroke Tabla player with Dadra selected at 76 BPM. Press Play to start; the highlighted beats help you follow sam and khali. This is an assembled sample-based theka, not a live concert recording.

Open Dadra · 76 BPM

For singing practice, our online Tanpura player supplies a continuous Sa; it does not provide rhythmic claps by itself. You can learn to find a suitable tonic in How to Find Your Sa or enable optional Tabla accompaniment separately.

Dadra theka variations: keep six beats while changing bols

Different tabla teachers, styles and performances use different Dadra thekas. DigiTabla documents many, including a bol-rich version associated with Chhotelal Misra. A simple early variation is recited as Dha Dhi Na-te-te | Dha Ti Na-ti. The small syllables te-te or ti fit inside existing matras; they do not create a seventh or eighth beat. [Source 3]

Basic cycle

Dha Dhin Na | Dha Tin Na
Beats 1 2 3 | 4 5 6

Simple teaching variation

Dha Dhi Na-te-te | Dha Ti Na-ti
Still 3 + 3; ornament beats 3 and 6.

A separate Benares Dadra form is documented as Dhi Dhi Na | Dha Tu Na. It is another example of why a printed chart should be called a common theka, not the only valid performance. [Source 4]

If you learn a variant, first recite the basic cycle until you can reliably mark 1 and 4 with your hands. Only then add faster subdivisions. Every embellished phrase still needs to return to the same beat 1.

Dadra taal vs Dadra singing style: the difference

The word “Dadra” refers to both a six-beat rhythmic cycle and a light-classical vocal genre. A singer might perform a composition described as a Dadra while the tabla accompanies it in Keherwa or another suitable taal. The name of the song form therefore does not prove which beat cycle the percussionist is playing. DigiTabla makes this distinction explicitly. [Source 1]

Dadra taal is frequently associated with thumri, ghazals, bhajans, dhun, folk song and other lighter music. These are examples of musical contexts, not strict rules: a ghazal or bhajan can be set to another taal. [Source 5]

Dadra vs Keherwa and Rupak: what changes?

TaalMatrasGroup lengthsClapWave
Dadra63 + 314
Keherwa84 + 415
Rupak73 + 2 + 24, 61 (also sam)

Dadra’s two groups of three are not the same as Western time signatures. A listener may feel a phrase with a triple lilt, but imposing “exactly 6/8” or “exactly 3/4” on every Indian performance can obscure the musician’s choice of subdivisions and tempo. First learn the actual matras, sam and gestures.

For all five common taals in one diagram, use the Tabla Taal List; for a very different six-plus-one feeling, try the Rupak 7-beat guide.

Four Dadra counting mistakes and how to avoid them

  • Clapping on beat 4: that is khali; wave there. Clap again only when the next cycle reaches 1.
  • Leaving a gap after beat 3 or 6: the vertical bar separates groups and the end of beat 6 connects straight to sam.
  • Confusing thumri or ghazal with a required rhythm: repertoire labels do not determine the taal without listening to the cycle.
  • Adding beats when you add ornaments: Na-te-te can be subdivisions of matra 3; it must not silently extend the total beyond six.

Frequently asked questions

Short beginner answers. Open a question to see its answer; the visible questions match the page's structured data.

How many beats are there in Dadra taal?

Dadra taal has six matras (beats), grouped into two vibhags of three: 3 + 3. Each cycle returns from beat 6 directly to sam on beat 1.

What is the basic Dadra taal theka?

A widely taught theka is Dha Dhin Na | Dha Tin Na. Some teachers recite Dha Dhi Na | Dha Ti Na; both represent the same six-beat cycle in common teaching notation.

Where are tali and khali in Dadra taal?

Clap on beat 1 (sam) and wave on beat 4 (khali). Continue counting beats 2, 3, 5 and 6 without extra claps.

What do X and 0 mean in Dadra notation?

X marks sam and the first clapped vibhag at beat 1. 0 marks the waved khali vibhag beginning at beat 4. They are group-start symbols, not extra beats.

Is Dadra taal the same as the Dadra singing style?

No. Dadra is both the name of a six-matra taal and of a light-classical song form. A composition in the Dadra song style may use Dadra taal or another suitable taal, such as Keherwa.

Does khali mean you do not play Dha on beat 4?

No. The common Dadra theka still plays Dha at beat 4. The change from Dhin on beat 2 to Tin on beat 5 helps create a lighter sound, but khali is not an instruction to stop the bass drum for every stroke in that half.

What is the difference between Dadra and Keherwa?

Dadra has six matras grouped 3 + 3 with khali on 4. Keherwa has eight matras grouped 4 + 4 with khali on 5. Both are often used in lighter music.

Can I practise Dadra taal without a tabla?

Yes. Say 1 2 3 | 4 5 6, clap on 1 and wave on 4, then recite Dha Dhin Na | Dha Tin Na one bol per matra. Start slowly and return to beat 1 without a pause.

Sources, references and photograph credits

The first diagram, comparison table and six-minute routine are original teaching material. The basic theka and documented alternative patterns are referenced below; individual performers and gharanas may use different ornamentation.

  1. DigiTabla: Dadra Tal — Description and Timekeeping. Confirms 6 beats, 3 + 3, X/0 and the Dadra song-form distinction.
  2. DigiTabla: Standard Dadra Theka. Roman and Devanagari notation, Dhin/Tin stroke notes and teaching demonstrations.
  3. DigiTabla: Dadra Theka Variations. Examples attributed to Chhotelal Misra and Dhi/Ti spoken variants.
  4. DigiTabla: Extended List of Tals and Thekas, including the Benares Dadra theka.
  5. David Courtney / Chandrakantha: Dadra Tal. Six-matra textbook structure and wide use in lighter genres.
  6. Video lesson: Dadra Taal (6 Matra) Tutorial for Beginners — Swar Sadhna Meerut, published 7 July 2016. Used as a clearly labelled external teaching demonstration; the example uses the Dha Dhi Na | Dha Tu Na variant.
  7. Real photographs: Tabla musician image by Mvkulkarni23 (CC BY-SA 3.0); detailed instrument photograph by Rounik Ghosh (CC BY-SA 4.0); article-hub concert image featuring sarangi and tabla by Jean-Pierre Dalbéra (CC BY 2.0). All from Wikimedia Commons. Photos may be resized or cropped to suit responsive layout; the originals and licenses are linked.