Keherwa taal (कहरवा ताल), also spelled Kaharwa, Keharwa or Kaharava, is an eight-matra rhythmic cycle widely used in North Indian light-classical, devotional, folk and popular music. It divides into two four-beat vibhags. You clap on beat 1 (sam) and wave on beat 5 (khali). A familiar classroom Keherwa theka is Dha Ge Na Ti | Na Ka Dhi Na. [Source 1]
The basic count is easy; what makes Keherwa interesting is its enormous range of performance variations. Learn the straight eight-beat cycle first, then explore how accents and laggi passages make the same count sound different. For a quick comparison with other rhythms, see our Tabla Taal List & Theka Chart.
8 matras · 4 + 4 · two vibhags
× Clap on 1 (sam) · 0 Wave on 5 (khali)
Dha Ge Na Ti | Na Ka Dhi Na
धा गे ना ती | ना के धी ना
What are the bols of Keherwa taal theka?
A bol is the spoken name of a tabla stroke or combination. A theka is a recognisable recurring bol pattern that expresses a taal. Recite the common beginner form below with one bol per matra and an even pulse:
English bols: Dha Ge Na Ti | Na Ka Dhi Na
Hindi bols: धा गे ना ती | ना के धी ना
Beat numbers: 1 2 3 4 | 5 6 7 8
Spellings such as Ti/Tin/Te, Ka/Ke and Dhi/Dhin are common in different teaching transcriptions. DigiTabla describes the written form Dha Ge Na Tin | Na Ke Dhin Na; the basic counts and vibhags are unchanged. [Source 2]
Player notation: The linked Tabla player now displays the DigiTabla transcription Dha Ge Na Tin | Na Ke Dhin Na and uses the resonant Tin/Dhin sounds. The Ti/Ka/Dhi syllables in this lesson remain a valid spoken classroom variant, not a different eight-beat cycle. The original small CC0 library still approximates certain articulations.
Keherwa theka chart: all eight numbered beats
The two cards below are an original visual guide. Warm brown marks the clapped first section; green marks the waved second section. Read the cells left to right, then start a new cycle immediately after beat 8.
Count 1–2–3–4 | 5–6–7–8 | 1–2–3–4 .... A wave does not add a pause or an extra beat.
| Matra | Bol (Hindi) | Symbol | Gesture |
|---|---|---|---|
| 1 | Dha धा | × | Sam · clap |
| 2 | Ge गे | — | Count |
| 3 | Na ना | — | Count |
| 4 | Ti ती | — | Count |
| 5 | Na ना | 0 | Khali · wave |
| 6 | Ka के | — | Count |
| 7 | Dhi धी | — | Count |
| 8 | Na ना | — | Count |
Where do you clap and wave in Keherwa?
Beat 1 is both sam (the start of the cycle) and the first tali: clap there. On beat 5 begin the khali vibhag by waving instead. The other matras remain counted but require no new clap. The symbols × 0 sit above the two groups; they do not mean “eight claps and waves.” [Source 1]
What khali sounds like: the second group often contrasts with the first through lighter or changed bass strokes, for instance Ka in place of an open Ge sound. But khali is not silence, and performing traditions may use other strokes there. Always preserve the gesture and eight-beat count even if the bols vary.
Why do musicians sometimes feel 3–3–2 inside 4+4?
This is the part that confuses many learners: the formal Keherwa structure stays 4 + 4 (two vibhags), while a common 3 + 3 + 2 pattern describes accents or phrases heard within those same eight beats. It is not a new tali–khali map, and 3–3–2 is not compulsory in every performance. DigiTabla describes this contrasting stress pattern as common in Keherwa rhythms and laggis. [Source 3]
An accent exercise over eight matras
Try saying ONE two three | FOUR five six | SEVEN eight while your counting hand still claps only at 1 and waves at 5. The stronger stress on 4 or 7 is a musical accent, not an extra formal clap. This is a training exercise, not a universal rule for Keherwa.
Why there are so many Keherwa thekas and laggis
Unlike some classical taals with more tightly recognised teaching thekas, Keherwa is used across an unusually wide range of genres. The introductory form Dha Ge Na Ti | Na Ka Dhi Na is excellent for learning, but it is not the single most common performance groove. A player accompanying a bhajan, ghazal, folk song or film melody might use quite different bol patterns while retaining the underlying eight-matra cycle. [Source 2]
For example, DigiTabla attributes the following beginner variation to the Benares teaching tradition: Dha Dhi Na Ti | Na Ke Dhi Na. The only change from our basic chart is Dhi in place of Ge on beat 2; the beat count, clap and wave do not move. [Source 4]
Basic: Dha Ge Na Ti | Na Ka Dhi Na
Variant: Dha Dhi Na Ti | Na Ke Dhi Na
Same framework: 1 2 3 4 | 5 6 7 8
A laggi is a livelier rhythmic accompaniment or improvisatory passage, often with more subdivisions and ornamentation. Instead of treating every extra syllable as a new matra, listen for the same eight-beat cycle underneath the flourish. You can hear authentic examples in the DigiTabla performance-style Keherwa and laggi demonstrations.
.jpg/960px-Tabla_Player_(49845731832).jpg)
Seven-minute Keherwa practice for beginners
You can learn the basic cycle without owning a tabla. Keep one steady pulse at a time; 70–90 BPM is a comfortable starting point for many beginners, not a prescribed speed.
- Minute 1 — Count eight evenly. Repeat 1–8 three times and return to 1 without a gap. Avoid turning 4 or 8 into a long pause.
- Minute 2 — Feel the two sections. Count 1 2 3 4 | 5 6 7 8, saying the group starts slightly more clearly.
- Minute 3 — Add clap and wave. Clap only on 1, wave only on 5, and count the other six matras evenly. Try four full cycles.
- Minute 4 — Replace numbers with bols. Speak Dha Ge Na Ti | Na Ka Dhi Na. One main syllable = one matra in the starter pattern.
- Minute 5 — Switch between counting and reciting. One cycle of numbers, one cycle of bols. Both should arrive at sam in the same place.
- Minute 6 — Hear the accent variation. With your voice only, try 3 + 3 + 2 accents over eight beats while keeping the 4 + 4 clap/wave gesture unchanged.
- Minute 7 — Test a new theka. Try Dha Dhi Na Ti | Na Ke Dhi Na. Find beat 1 every time and then attempt a few uninterrupted cycles.
Hear Keherwa with highlighted beats
Our free recorded-stroke Tabla player opens with Keherwa selected at 80 BPM. Press Play yourself and follow the clap on 1 and wave on 5. These are assembled samples, not a live performance.
Watch Keherwa taal on a real tabla
For a listening example, this beginner lesson by Swar Sadhna Meerut walks through the eight matras, two vibhags, clap on 1, wave on 5 and the Dha Ge Na Te | Na Ka Dhi Na theka. Pronunciation of Ti/Te and Dhi/Dhin differs slightly between teaching styles.
Pause after the first demonstration. Clap through four eight-beat cycles and keep the wave on beat 5. YouTube loads only when you press Play. The tutorial is in Hindi.
Watch the original YouTube lesson →Where is Keherwa used in Indian music?
Keherwa is common in bhajans, ghazals, thumri, regional folk songs, film songs and other light-classical contexts. The genre does not guarantee the taal: a bhajan might be in Dadra or another cycle, and performers often change the accompaniment texture. What matters is identifying the repeated eight-matra framework beneath the surface rhythm. [Source 3]
If you sing, our Tanpura drone can hold your chosen Sa while you count. It does not itself indicate beat 1; for that use the Tabla practice tool. If the Sa feels uncomfortable, our How to Find Your Sa guide can help select your pitch.
Keherwa vs Dadra vs Teentaal
Do not assume an eight-beat pulse must be Keherwa just because you hear a familiar light rhythm: identify the hand gestures, phrase cycle and accompaniment context. For visual comparisons with five beginner taals, see the Tabla Taal List.
Four Keherwa mistakes to avoid
- Clapping at beat 5 instead of waving: beat 5 begins the second, khali vibhag; the count continues through beats 5–8.
- Adding beats for fast laggi phrases: additional bol syllables can be subdivisions of the original eight matras.
- Confusing 3+3+2 accents with the official vibhags: the formal cycle is still 4+4, and your clap/wave markers stay on 1 and 5.
- Declaring one bol pattern the only correct Keherwa: regional and genre-based patterns vary. Learn the structure well enough to recognise different thekas.
Frequently asked questions
Short answers to common Keherwa, Kaharwa and Kehrwa notation questions.
How many beats does Keherwa taal have?
Keherwa (also called Kaharwa) has eight matras, grouped into two vibhags of four beats each: 4 + 4.
What are the bols of Keherwa theka?
A widely taught form is Dha Ge Na Ti | Na Ka Dhi Na. You may see Tin for Ti, Ke for Ka, or Dhin for Dhi depending on teacher and transcription.
Where are tali and khali in Keherwa?
Clap on the first matra (sam) and wave on the fifth matra (khali). Count all eight beats continuously, including during the wave.
Is Keherwa taal always the same theka?
No. The eight-beat cycle and its two four-matra vibhags are stable teaching landmarks, but accompaniment patterns change widely with style, region, teacher and genre.
What is the difference between 4+4 and a 3-3-2 groove?
4 + 4 describes Keherwa's two formal vibhags. A 3 + 3 + 2 stress pattern is a common phrase or accent grouping inside the same eight-beat cycle. It does not change the clap on 1 or wave on 5.
What is a laggi in Keherwa?
A laggi is a lively, usually ornamented rhythmic accompaniment pattern often used in light-classical music. It can add fast subdivisions while the underlying Keherwa cycle remains eight matras.
Is Keherwa the same as Dadra or Teentaal?
No. Keherwa has eight matras (4 + 4), Dadra six (3 + 3), and Teentaal sixteen (4 + 4 + 4 + 4). Keherwa has a clap on 1 and wave on 5.
Can I practise Keherwa without a tabla?
Yes. Count 1 2 3 4 | 5 6 7 8, clap 1, wave 5, and speak Dha Ge Na Ti | Na Ka Dhi Na one bol per beat. Start slowly and repeat without a pause.
Sources, video and real-photo credits
Our eight numbered matras, accent diagram and seven-minute routine are original editorial teaching examples, checked against the linked sources. Specific bols can vary by tradition; none is claimed to represent every performance.
- DigiTabla: Kaharawa Tal — Structure and Timekeeping. Eight matras, two 4-beat divisions and X–0 hand gesture.
- DigiTabla: Standard Kaharawa Theka. The classroom theka and why many performance styles differ.
- DigiTabla: Kaharawa Tal — Musical Context and 3-3-2 Accents. Light-classical use, laggis and rhythmic emphasis.
- DigiTabla: Kaharawa Theka Variations. The Chhotelal Misra teaching variations and Ti/Tin, Dhi/Dhin transcriptions.
- Instructional video: Keharwa Taal (8 Matra) Tutorial for Beginners — Swar Sadhna Meerut, published 7 July 2016. The video uses an equivalent Te/Ti pronunciation.
- Photographs: Tari Khan solo by Rupesh Kotecha (CC BY-SA 4.0); tabla player at WOMADelaide by Michael Coghlan (CC BY-SA 2.0); article-hub photo of a Baul performance's tabla accompanist by Wikimedia Bangladesh (CC BY-SA 4.0). Wikimedia Commons. Resized and responsively cropped; original files and licenses remain linked.